フェラル

Products

Capillary Ferrules for 1/16-Inch Compression-Type Fittings

Available in Vespel, graphite, or Vespel/graphite material.

製品情報を見る

Standard Ferrules for 1/16-, 1/8-, and 1/4-Inch Fittings

Available in Vespel, graphite, or Vespel/graphite material.

製品情報を見る

Reducing Ferrules

Available in graphite or Vespel/graphite material.

製品情報を見る

Blank Ferrules for 1/16-Inch Fittings

Vespel/Graphite Ferrules
  • VG2, 60% Vespel/40% graphite blend offers the best combination of sealing and ease of workability.
  • VG1, 85% Vespel/15% graphite blend offers equivalent composition to Agilent Vespel/graphite ferrules.
  • Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses.
  • Stable to 400 °C.

製品情報を見る

Ferrules for Micropacked Columns

Standard—for 1/16" Fittings

Ferrules for Micropacked Columns

Compact—for Agilent GCs

Ferrules for Micropacked Columns

Capillary—for 1/16" Compression-Type Fittings

Ferrules (Fit 0.53mm ID MXT Columns)

for SRI & Buck Scientific GCs

Ferrules (Fit 0.25/0.32mm ID MXT Columns)

for SRI & Buck Scientific GCs

Ferrules (Fit 0.53mm ID MXT Columns)

島津 17A, 2010, 2014, 2030用

Ferrules (Fit 0.25/0.32mm ID MXT Columns)

島津 17A, 2010, 2014, 2030用

Ferrules (Fit 0.32mm ID Fused Silica Columns)

島津 17A, 2010, 2014, 2030用

Swagelok Nut & Ferrule Set (Brass & Stainless Steel)

Restek is pleased to offer one of the premier lines of fittings available for chromatographers in the market today. We can supply the entire line of Swagelok fittings. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If you don't see the exact product you're looking for, please call us for a quote.

製品情報を見る

Swagelok Front Ferrule (Brass & Stainless Steel)

Restek is pleased to offer one of the premier lines of fittings available for chromatographers in the market today. We can supply the entire line of Swagelok fittings. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If you don't see the exact product you're looking for, please call us for a quote.

製品情報を見る

Swagelok Back Ferrule (Brass & Stainless Steel)

Restek is pleased to offer one of the premier lines of fittings available for chromatographers in the market today. We can supply the entire line of Swagelok fittings. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If you don't see the exact product you're looking for, please call us for a quote.

製品情報を見る

Parker Nut & Ferrule Set (Brass & Stainless Steel)

Parker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular Parker fitting that you are looking for and it is not listed here, please contact us to inquire about availability.

製品情報を見る

Parker Front Ferrule (Brass & Stainless Steel)

Parker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular Parker fitting that you are looking for and it is not listed here, please contact us to inquire about availability.

製品情報を見る

Parker Back Ferrule (Brass & Stainless Steel)

Parker’s (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass and stainless steel. Siltek/Sulfinert treated or Silcosteel-CR treated fittings are also available. If there is a particular Parker fitting that you are looking for and it is not listed here, please contact us to inquire about availability.

製品情報を見る

Alumaseal Ferrules

  • Aluminum construction—will not crack or fragment.
  • No retightening required after temperature cycles—excellent for GC-MS.
  • Eliminate out-gassing and make leak-tight seals for less detector noise.
  • Unique two-piece design permanently locks on fused silica tubing without causing breakage.
  • Will not stick in fittings, unlike Vespel or graphite ferrules.
  • Stable to 550 °C.
  • Use with any 1/16" compression-type fitting.

製品情報を見る

Graphite Ferrules for SeCure "Y" Connectors

  • Preconditioned to minimize out-gassing.
  • High-purity, high-density graphite.
  • Stable to 450 °C.
  • No binders that can off-gas or adsorb analytes.
  • Smooth surface and clean edges.

製品情報を見る

Graphite Ferrules for Vu2 Union Connectors

  • High-purity, high-density graphite.
  • Stable to 450 °C.
  • No binders that can off-gas or adsorb analytes.
  • Smooth surface and clean edges.

製品情報を見る

5 mm Ferrules

島津 17A用

  • For use with packed columns.
  • Graphite construction.

製品情報を見る

PTFE Ferrules

  • Upper temperature limit 250 °C.
  • 100% PTFE; completely inert.
  • One-piece design requires no back ferrule.

製品情報を見る

Valco 1/16-Inch Adaptor Ferrules

Fused silica adaptor ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350 °C. The determining factor for selecting adaptor ferrule size is the fused silica tubing OD.

製品情報を見る

Encapsulated Ferrules for 1/16-Inch Compression Fittings

  • Reusable—will not deform and stick in fittings.
  • Less torque needed to seal ferrule.
  • Restek’s unique blend of graphite minimizes fragmentation and out-gassing.

製品情報を見る

Valco 1/32-Inch Adaptor Ferrules (Valcon Polyimide)

Fused silica adaptor ferrules are made from Valcon polyimide, a unique, graphite-reinforced composite specially prepared to maximize mechanical stability at temperatures up to 350 °C. The determining factor for selecting adaptor ferrule size is the fused silica tubing OD.

製品情報を見る

2穴 フェラル

  • Use 1/16-inch, two-hole ferrules with the 1/16-inch capillary inlet adaptor fitting kit (cat.# 27185).
  • Use 1/8-inch, two-hole ferrules with the 1/8-inch capillary inlet adaptor fitting kit (cat.# 20645).

製品情報を見る

GRAPHPACK 3D/2 Ferrules

GRAPHPACK technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule—the ideal seal for GC applications.

製品情報を見る

Vu-Union Graphite Ferrules

  • Use with capillary Vu-Union and "Y" Vu-Union connectors.
  • 450°C maximum operating temperature.

製品情報を見る

Vu-Union Vespel/Graphite Ferrules

  • Use with Vacuum Vu-Union connectors.
  • 60% Vespel/40% graphite.
  • 400 °C maximum operating temperature.

製品情報を見る

Valco Ferrule Removal Kit

The tapered tools in this kit have teeth designed to grip and remove fused silica adaptor ferrules that have become stuck in the fitting detail. Each kit has two tools: one for removing 1/32-inch adaptor ferrules and one for removing 1/16-inch adaptor ferrules.

製品情報を見る

Stainless Steel Jet Reamers / Ferrule Removers

A great tool for cleaning detector jets or removing stuck ferrules from other small orifices. Serrated design is optimal for removing silica deposits and other contaminants.

製品情報を見る

セプタム取り外しツール

  • Use hooked end for removing septa and O-rings; pointed end works well for removing stuck ferrules or debris.
  • Keep several on hand in your laboratory for other uses, too.

製品情報を見る

4" Tapered Needle Files

These files can be used for many purposes. They are especially useful for removing ferrules that are lodged in injector or detector ports.

製品情報を見る

Mini Hand Drill Set

Drill ferrules to the proper ID in seconds! Includes three drills, for use with 0.25, 0.32, and 0.53 mm ID (0.4, 0.5, and 0.8 mm OD) capillary columns.

製品情報を見る

Restek Domestic Customer Service

件名

メッセージ

氏名

あなたのメール

会社名

住所

Spam Block (Please leave this blank)
添付ファイルをここにドラッグアンドドロップ(任意)
...

全ての必須項目

ありがとうございました

メッセージが送信されました。近日中にご連絡いたします。

メッセージは送信されませんでした

申し訳ありません。現在メッセージが送信できません。後でもう一度試すか、電話でRestekもしくはRestekの担当者にお問合せください。

www.restek.com/Contact-Us